SPD-20: Adjusting the Pad’s Minimum Level (TRIG THRESHOLD)

Tags: spd-20
Use the following procedure to prevent the pads from sounding in response to
extraneous vibrations from another pad:

1) Press EDIT.
2) Press SELECT so the SYSTEM parameter group LED is lit.
2) Use the UP or DOWN CURSORS to select "TRIG THRESHOLD."
3) Strike one of the 8 pads.
4) Use PATCH/VALUE [-] or [+] to set the value.

Note: If you strike a pad with a force less than the Trigger Threshold, it will
not sound.