RS-9, RS-5: Initializing - Restoring the Factory Settings

Tags: reset,factory,initialize,rs-5,rs-9
The following procedure will clear the internal memory and reload the factory settings on your RS-5 / RS-9:

(CAUTION!!!!: All USER information will be lost!!! Be sure to back up any information you wish to keep!!!)

1. Press UTILITY so it is lit.

2. Press VALUE + / - to select "Factory Reset."

3. Press ENTER.

4. Press VALUE + / - to select "ALL."

5. Press ENTER twice to finish.

NOTE: Never turn off the power during a Factory Reset. This may result in corrupted internal data and may prevent the power from being turned on again.