VS-2480, VS-2480CD: Assigning a Channel Direct Out to an Output using a VGA Monitor and Mouse

Tags: vs-2480,vs-2480cd,output,aux,direct
It is possible to send the direct signal from a single channel to one of the outputs. Use the following procedure to route the signal from TRACK 1 to AUX A(L):

1. Click on the Track number for Track 1.

2. Click on DIR 1.

3. Click EZ ROUTING.


5. Drag the virtual connection from AUX A to DIR 1/2 by clicking and holding the left mouse button.

NOTE: There are 8 direct outs. They can be used from any channel(input or track.)