AR-2000: RDAC Grade Setting

Tags: ar-2000

To change the RDAC settings on the AR-2000, use the following procedure:

1. In the recording standby mode, press the MODE button. The display will change to the GRADE/remaining recording time display.

2. Rotate the SELECT dial to select “GRADE.”

3. Press the SELECT dial.

4. Rotate the SELECT dial to select the RDAC-GRADE.

5. Press the ENTER button to set the RDAC-GRADE.

6. Press the MODE button to return to the recording level display. Note that it is not possible to change the RDAC-GRADE while recording.