D-70: Loading Original Factory Sounds from a Card

Tags: reset,init,d-70,reinit
Before loading the factory sounds, you should reset the global parameters and clear the memory. Use the following procedure to set up the D-70 to receive original sounds from a card:

NOTE: The following procedure will clear the internal memory and reload the factory settings:

(CAUTION: All USER information will be lost. Be sure to back up any information you wish to keep.)

1. Hold the NUMBER 8 button and turn the power on.

2. Press ENTER.

You are now ready to load the factory sounds from your card:

1. Put the card in the RAM CARD slot.

2. Press EDIT.

3. Press F5[SYSTEM].

4. Press F1[I <> C].

5. Press the INC button to select "INTERNAL < RAM CARD."

6. Press F3[ALL].

7. Press F1[TRANSFER].

8. Press ENTER.

9. Press EXIT twice.

10. You will need to select another Performance to see the
new data.