MC-307: Using The Grab Switch

Tags: effects,switch,mc-307,grab
Use the following procedure to add effects to a Pattern with the GRAB switch:

1. Press PTN, then press PRESET.

2. Use the VALUE dial to select Pattern #40 "New Electro 1."

3. Press PLAY.

4. Push the GRAB switch to ON and listen to the Pattern with effects.

5. You can use the ASSIGNABLE KNOBS 1-4 to change the effects parameters in real time.

6. Pull down on the GRAB switch and switch between OFF and GRAB. This allows you hear the Pattern with realtime on/off control of the effects.

7. Press STOP to end playback.