R-70: Adjusting the Level and Pan per Instrument
Use the following procedure to adjust the level and pan settings for
instruments in the R-70:
1) Press MIXER. You should now see a screen with several fader levels shown. If
you do not see the faders, press the LEFT CURSOR button.
2) Press the pad of the instrument that you wish to change.
3) Move the cursor with the RIGHT CURSOR button to the word surrounded by [ ]
and move the VALUE SLIDER to see the desired parameter. The options are [VOL],
[OUT], [FX1], and [FX2].
4) From this position, press RIGHT CURSOR once and use the VALUE SLIDER to
achieve the desired level. Possible values are 1-15.