The AR-2000 outputs two different types of control output signals: Busy Output and Control Output. Both signals are an On/Off signal with a maximum contact capacity of DC 30V, 5A. Busy Output signals and Control Output signals are used in the following applications:
Busy Output can be used as a way of turning on an external amplifier or other device during phrase playback. The Busy signal is output from the BUSY OUT pin during recording and playback. Busy Output is configured under the System Setup Menu.
Control Output enables control of external devices after the playback of a phrase. The Control Output signal is output from the CONT OUT pin after phrase playback. Control Output is set by the Control Output setting located in the Phrase settings.