GS-10: The Ouput Select

Tags: gs-10
It's important to choose the appropriate Output Selection so it matches as close as possible to what the GS-10 is connected to. This optimizes the sound character of the GS-10 as a whole for your specific setup. For example, if you have the GS-10 connected to a PA system, you would choose "LINE/PHONES." Use the following steps to set the Output Select:

1. Press SYSTEM until "OUTPUT: Select" shows in the display.

2. Turn the PATCH/VALUE dial to choose the desired setting;

LINE/PHONES (Use this when connected to a PA, Recorder, or Headphones)
COMBO AMP (Use this when connected to a Combo amp)
STACK AMP (Use this when connected to Stack amp)
COMBO RETURN (Use this when connected to a Combo amp's Return)
STACK RETURN (Use this when connected to a Stack amp's return)

4. Press EXIT when finished. The setting is stored automatically.