FP-7: Using a Pedal to Change Registrations

Tags: pedal,fp-7
Use the following procedure to use a Foot Pedal to change Registrations on the FP-7:

1. Press the FUNCTION button so it begins flashing.

2. Press the REGISTRATION button to display the Registration menu.

3. While holding down the DISPLAY button, use the [-] [+] buttons to highlight "Shift."

4. Use the [-] [+] buttons to select the desired settings.

NOTE: The following settings are possible:

Off - Pressing a pedal connected to the FC2 connector or FC1 connector will not switch registrations. Instead, the other functions assigned to the FC2 jack and FC1 jack will be available for use (See the list of options on page 118).

FC 2 - The pedal connected to the FC2 jack can be used only for switching registrations. In this case, the function assigned to the FC2 jack (See the list of options on page 118) cannot be used.

FC 1 - The pedal connected to the FC1 jack can be used only for switching registrations. In this case, the function assigned to the FC1 jack (See the list of options on page 118) cannot be used.