VS-2480, VS-2480CD: Routing the Metronome to an Aux Buss for a Headphone Mix

Tags: vs-2480,vs-2480cd,mix,metronome,routing,headphones
Use the following procedure to route the metronome to the AUX bus that you are using for your headphone mix:

1. Press UTILITY.

2. Press the PAGE button several times to select "Page 3."

3. Press F4(OscAna).

4. Use the CURSOR buttons and the TIME/VALUE dial to set "Source" to METRONOME."

5. Turn "SW" to "ON."

6. Turn the AUX switch for the Aux bus that you are using for your Headphone mix to "On."

7. Use the TIME/VALUE dial to adjust the send level for that aux bus.