AE-7000, VM-7100, VM-7200: Connecting the AE-7000 to the VM-3100Pro

Tags: ae-7000,vm-7100,vm-7200

Use the following procedure to set-up the AE-7000 for use with the VM-3100Pro:

1. With the power off to all devices, connect the VM-3100Pro to the AE-7000 with the R-BUS cable.

2. Turn on the AE-7000, then the VM-3100Pro.

3. Press CLOCK SOURCE on the AE-7000 to select R-BUS as the sampling clock.

Set up the VM-3100Pro as follows:

4. Press the SYSTEM/CONTRAST button.

5. Use the TIME/VALUE dial to select INTERNAL.

6. Press LEVEL METER to exit.