DD-2: Specifications

Tags: dd-2
DD-2: Digital Delay

Power:
9V DC Dry Battery
AC Adaptor (DC 9V) - BOSS PSA-120 or PSA-120T, Optional

Current Draw:
45mA ~ 65mA (9V DC)

Controls:
EFFECT LEVEL
FEEDBACK
DELAY TIME
MEMORY SELECOR SWITCH

Others:
NORMAL/EFFECT CHANGEOVER (HOLD ON/OFF)FOOTSWITCH

Jacks:
INPUT
DIRECT OUTPUT
MAIN OUTPUT
AC Adaptor (DC 9V) Jack
System:
ANALOG LOGALITHMIC COMPRESSION AND 12 BITS QUANTIZING SYSTEM

Delay Time:
12.5ms(MIN) to 800ms(MAX)
S(SHORT) 50ms (12.5ms to 50ms)
M(MIDDLE) 200ms (50ms to 200ms)
L(LONG) 800ms (200ms to 800ms)

Hold Time:
200ms(MIN) to 800ms(MAX) in Hold Mode

Frequency Responce:
DELAY SOUND:40Hz to 7kHz/ +1-3 dB
DIRECT SOUND:10Hz to 60kHz/ +1-3 dB

Residual Noise Level:
-95 dBm (IHF-A)

Input Impedance:
1 M Ohm

Output Load Impedance:
10k Ohms or more

Dimensions:
70(W) x 55(H) x 125(D) mm
2-3/4(W) x 2-3/16(H) x 5(D) inches

Weight:
450g / 1 lb.

* In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.