VM-3100: Sending Signal from a specific channel to the AUX SEND Jacks
Use the following procedure to send signal from a specific channel to the AUX
1) Press the [SELECT] button for the channel whose signal you want sent to the
AUX SEND jacks.
2) Press [FX/AUX SEND].
3) Press RIGHT CURSOR (>) one or more times and select "AUX 1" and "AUX 2."
4) Rotate the VALUE dial or the corresponding V3 or V4 knobs to adjust the send
levels of the signal
sent to the AUX SEND jacks.