Tags: song,trigger,loops,td-8
It is possible to assign a pattern to be triggered by a pad. This feature is referred to as "Pad Pattern" in the TD-8. Use the following steps to assign a pattern to a pad within a kit:

1. Press KIT so it is lit.

2. Select a desired drum Kit using the VALUE dial or the INC+/DEC- buttons.

3. Press F3 twice.

4. Strike a Pad to be assigned.

5. Turn the VALUE dial, or use the INC+/DEC- buttons to select a desired pattern. Note: If "OFF" is selected, no pattern will play.

6. Press EXIT or KIT when finished. Strike the same pad to play the pattern.