GR-20: Selecting the Correct Output Setting

Tags: sound,gr-20,line
It’s a good idea to tell the GR-20 what you are connected to for amplification- i.e. a guitar amp or PA system etc. This setting (referred to as Output Select) allows the GR to internally optimize its sound for the type of playback system you’re using. Use the following procedure to change the Output Selection to match your set up:

1. Press SYSTEM/EDIT so the indicator under “OUTPUT LINE/AMP” is lit.

2. Turn the NUMBER/VALUE dial to select the appropriate setting; “GA” - if you’re connected to a guitar amp. “Ln”- if you’re connected to a PA, keyboard amp, mixer, recorder or headphones.

3. Press EXIT when finished.