WS-100: Technical Specifications

Tags: ws-100
WS-100 WIRELESS SYSTEM

GENERAL CHARACTERISTICS

Frequency Response : 20Hz to 10kHz ( + 3dB)
Total Distortion Harmonics : Less than 2.0% ( + 22.5kHz Deviation)
Residual Noise : Less than - 94dBm (IHF - A)
Transmission Boost: 0dB (LINE)
Operation Temperature Range : 0 to 40 Degrees C
Accessories : Angle x 2, Antenna x 2, Soft Case
FCC Compliance : Type accepted under part 90 FCC requires
licensing
(Form 574) for non - governmental users.

TRANSMITTER

Modulation : FM
Transmission Frequencies:
Channel 1 : 169.445 MHz
Channel 2 : 170.245 MHz
Channel 3 : 171.105 MHz
Channel 4 : 171.905 MHz
(One of these four frequencies is selected from the manufacturer)
Transmitter Type : Quartz
RF Power Output : Less than 50 mW
Antenna : Flexible Antenna
Controls :
Power (Input Gain Control)
Mute
Remote x 2
Indicator : Battery
Input Jack : Standard Phone
Input Impedance : 1 M W (Mic)
Maximum Input Level: 0dBm (Line), - 30dBm (Mic) / 1 kHz
Battery Life :
Continuous Operation at 25 Degrees C
More than 8hours (Regular Battery)
More Than 20 Hours (Alkaline Battery)
Battery : 9V Dry Battery
Weight : 130g / 5 oz (Including the battery, antenna and soft
case)
Dimensions :
51 (W) x 120 (H) x 22 (D) mm
2' x 4 - 3 / 4' x 7 / 8'

RECEIVER

Modulation : FM
Reception Frequencies :
Channel 1 : 169.445 MHz
Channel 2 : 170.245 MHz
Channel 3 : 171.105 MHz
Channel 4 : 171.905 Mhz
(One of these four frequencies is selected from the manufacturer)
Reception System : Space Diversity
Receiver Type : Single Super Heterodyne
Frequency Oscillation : Quartz
Antennas : Whip Antenna x 2
Sensitivity: 10dB µ V (S / N Ratio : 60dB)
Reception Band Width : + 140 kHz
Controls :
Power
RF
Diversity x 2
Remote x 2
Output Impedance : 2k ½
Jacks:
Send x 2
Return x 2
Output
Power Source : 117V AC, 50 / 60Hz
Power Consumption : 9W
Weight : 2.4 kg / 51 lb 5 oz
Dimensions:
436 (W) x 49 (H) x 216 (D) mm
17 - 3 / 16' x 1 - 15 / 16' x 8 - 7 / 16'
(Including Rubber Feet)