PH-3: Specifications

Tags: ph-3
PH-3: Phase Shifter

Nominal Input Level:
-20 dBm

Input Impedance:
1M Ohm

Nominal Output Level:
-20 dBm

Output Impedance:
1k Ohm

Recommended Load Impedance:
10 Ohms or greater

Residual Noise:
-92 dBu (IHF-A, Typ.)

Controls:
Pedal Switch
RATE Knob
DEPTH Knob
RES (Resonance) Knob
STAGE Switch

Indicators:
CHECK Indicator
(Serves also as tempo and battery check indicator)

Connectors:
INPUT Jack
OUTPUT Jack
EXP/CTL Jack
AC Adaptor Jack

Power Supply:
DC 9 V: Dry Battery (9 V Type) S-006P/9 V (6F22/9 V)
Dry Battery (9 V Type) 6AM6/9 V (Alkaline)
AC Adaptor: BOSS PSA-120, Optioinal

Current Draw:
50mA (DC 9V)
*Expected battery life under continuous use:
Carbon: 2 Hours
Alkaline: 6 Hours
* These figures will vary depending on the actual conditions of use.

Dimensions:
70(W) x 125(D) x 55(H) mm
2-3/4(W) x 5(D) x 2-3/16(H) inches

Weight:
420g / 15 oz. (Including Battery)

Accessories:
Owner's Manual
Roland Service
Dry Battery (9 V Type) S-00P/9 V (6F22/9 V)

* The battery that was supplied with the unit is for temporary use - intended primarily for testing its operation. We also suggest replacing this with an alkaline dry cell.

Options:
AC Adaptor BOSS PSA-120
Expression Pedal (Roland EV-5)
Footswitch :Momentary Type (BOSS FS-5U)
Dry Battery (9 V Type)6AM6/9 V (Alkaline)

* 0 dBu = 0.775 Vrms

* In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.