TD-20: Assigning MFX (Multi-Effects) to the Direct Outs
It is possible to assign the Multi-Effects in the TD-20 to Direct Outputs 5/6 or 7/8. Use the following steps to do so:
1. Select a desired Drum Kit to work with.
2. Press SETUP.
3. Press F2 (OUTPUT).
4. Press F4 (OTHER).
5. Press the CURSOR LEFT or RIGHT (< >) buttons to select "MFX."
Tip: You can also choose other things that can be assigned to the direct outs in this same menu.- i.e. "CLICK" or "AMB" (Abience) etc.
6. Turn the VALUE dial to select the desired output setting.
7. Press KIT when you're finished.