SPD-20: Setting the Basic Receive Channel

Tags: spd-20
The SPD-20 receives MIDI messages (note message, Program Change messages,
Control Change Messages) on it’s Basic Channel. When using an external MIDI
device to play the SPD-20’s sound generator, set the Transmit Channel of the
external MIDI device to match the Basic Channel of the SPD-20.

1) Press EDIT to enter the edit mode.
2) Press SELECT so the SYSTEM parameter group LED is lit.
3) Use the CURSOR UP/DOWN buttons to select "BASIC CH."
4) Use the PATCH/ VALUE buttons to specify the channel number (1-16).
5) Press EDIT to return to the Play mode.