Tags: setup,vs-cdr
Use the following procedure to set up a VS-Series product to burn a CD with the VS-CDR:

1. With all equipment turned off, connect the SCSI port of the VS-CDR to the SCSI port of the VS product.

2. Attach the terminator to the remaining SCSI port on the VS-CDR. If you are using multiple SCSI devices, connect them to the CD-R drive and terminate the last device in the chain.

3. Set the ID numbers of each SCSI device so that they do not conflict (VS products default to SCSI ID #7).

4. Turn on the power in the following order: VS-CDR, VS product, audio equipment.