XP-30: Assigning the Pedal Switch to Control the Rotary Speed

Tags: xp-30
Use the following procedure to assign a pedal to switch the Rotary Speed of the Rotary Effect:

1. Press SYSTEM so it is lit.

2. Press the PART 3/11 button so it is flashing.

3. CURSOR to display "CONTROL PEDAL."

4. CURSOR to "ASSIGN."

5. Use the VALUE dial to set "ASSIGN" to "CC04: FOOT-TYPE."

6. Press PATCH so it is lit.

7. Use the VALUE dial to select "PR-A:054 ROCKER SPIN."

8. Press EDIT so it is lit.

9. Press the PART 2/10 button so it is flashing.

10. CURSOR to display "PATCH EFX CTRL."

11. CURSOR to "SPEED."

12. Use the VALUE dial to set "SPEED" to "FOOT:+63."

13. Press EXIT.

14. Connect a footswitch to the "CONTROL PEDAL" jack.

NOTE: Use a Roland DP-2, DP-6 or DP-8 footpedal.

NOTE: Be sure to WRITE your settings into a USER PATCH.