TD-10: Synchronization

Tags: midi,slave,clock,td-10
The sequencer in the TD-10 can be synchronized to any device that transmits MIDI clock. Use the following procedure to set the TD-10 to external sync:

1. With a MIDI cable, connect the MIDI OUT of the External device to the MIDI IN of the TD-10.

2. Press PATTERN.

3. Press F2 (FUNC).

4. Press F1 (GLOBAL).

5. Turn the VALUE dial to select "EXTERNAL."
Note: The pattern selected in the TD-10 will only start after receiving a "MIDI Clock" message. The external MIDI device determines the tempo and the TD-10 will follow in "sync" when you start or stop the external unit.

6. Press PATTERN to return to Pattern Play Mode.