EM-2000: Saving Settings in a User Program

Tags: em-2000
The EM-2000 allows you to save your favorite settings in User Programs. A User
Program includes settings for Tone selections, Music Style, tempo, transpose,
and volume. There are 192 User Program locations in the EM-2000. Use the
following procedure to write your settings in a User Program:

1) Press and hold down WRITE. Continue holding down this button while
executing steps 2-4.

NOTE: If the EM-2000’s memory is protected, "Internal Memory is PROTECTED!!"
will be displayed following step 1. To disable protection, release WRITE and
press Part Select [UPPER 1]. Return to step 1 to continue the writing
procedure.

2) Using the TONE/USER PROGRAM GROUP buttons, select a destination Group (A,
B, or C).
3) Using the TONE/USER PROGRAM number buttons (1-8), select a destination
Bank.
4) Using the TONE/USER PROGRAM number buttons (1-8), select a destination
number.
5) Release WRITE.