HR-2: Specifications

Tags: hr-2
HR-2: Harmonist

A/D Conversion:
16 bit linear, 128 times oversampling

D/A Conversion:
16 bit linear

Sample Frequency:
32kHz

Nominal Input Level:
-20dBm

Input Impedance:
1M Ohm

Nominal Output Level:
-20dBm

Output Impedance:
1k Ohm

Dynamic Range:
110 dB or greater (Direct)
90 dB or greater (Effect)

Controls:
Pedal Switch
E. LEVEL Knobs A/B
VOICE SWITCHES A/B
KEY Switch

Indicator:
CHECK Indicator (Also serves as battery check)

Connectors:
INPUT Jack
OUTPUT Jacks A(MONO)B
DETECTOR IN Jack
AC Adaptor Jack (9VDC)

Power Supply:
9V DC : Dry battery 9 V type (6AM6/9 V)
AC Adaptor (BOSS PSA Series: Optional)

Current Draw:
75 mA (9 V DC)
* Expected battery life under continuous use:
Alkaline: 5 hours
These figures will vary depending on the actual condition of use.

Dimensions:
170(W) x 156(D) x 70(H) mm
6-3/4 (W) x 6-3/16(D) x 2-13/16(H) inches

Weight:
420g/15oz (including batteries)

Accessories:
Owner's Manual
Dry battery 9 V type (6AM6/9 V)

Options:
AC Adaptor (BOSS PSA-120 or PSA-120T)
Multiple Jack 1-5

* 0 dBu = 0.775 Vrms

* In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.