SP-808: Setting Pitch Change Width

Tags: sp-808
The D-Beam can control the pitch of a sample being played back. The range or depth of this pitch change can be adjusted. Use the following procedure set the D-Beam pitch change width:

1. Hold SHIFT and press PAD TRIG to display "D BEAM SETUP."

2. Use the CURSOR buttons to select "Pitch Width."

3. Use the VALUE dial to set the pitch change width, selecting from "NARROW," "MEDIUM," and "WIDE."

4. Press PLAY.

Note: The NARROW setting causes the D-Beam to have less of a pitch change result than a WIDE setting.