JP-8000: Synchronizing Chorus

Tags: jp-8000
Use the following procedure to synchronize to an external device’s tempo clock
(e.g. sequencer):

1) Hold SHIFT and press 2 for PFM Prt.
2) Press 2 until Chorus Sync, Delay Sync and LFO Sync are displayed.
3) Use Bank Value Up/Down buttons to turn each parameter on.
4) Hold SHIFT and press 5 for MIDI SW.
5) Use Bank Value Up/Down buttons to turn it on.

Note: Be sure the external device is set so it will transmit MIDI Clock
messages.