VS-2000CD: Clearing a Locator

Tags: edit,clear,vs-2000cd,locator,clearing
Locators store the time of the current position in a TRACK/STATUS button. The button lights up once the time is stored in Locator mode. When pressed, the lighted button jumps to the position of that stored time in the project. There are six banks of 16 locators.

1. Press the LOCATOR[SCENE] button if it's not already lit green.
2. While holding down CLEAR, press the desired locator's TRACK/STATUS button. The light should turn off, thus clearing the locator point.