RSP-550: Copying Programs

Tags: rsp-550
Use the Copy procedure whenever you wish to make a new Effects Programs that
is in many ways similar to an existing one,or when you wish to arrange Effects
Programs that is in many ways similar to an existing one, or when you wish to
arrange Effects Programs in a specific order.

First turn the MEMORY PROTECT OFF:
1) Press SYSTEM. The button indicator will light, showing you are in the
System mode.
2) Use the PAGE UP [^] or DOWN [v] buttons,to select the Memory Protect page,
then use VALUE the same buttons to turn it OFF.
3) Press SYSTEM OR EXIT once again.The button indicator will go out ,showing
you have left the System mode .

Now let’s perform the COPY:

4) Select the original Program Number.
5) Press WRITE. The button indicator will light,showing you are in the Write
mode.
6) Use the PROGRAM UP [^] or PROGRAM DOWN [v] buttons to select the Copy
Destination. When changing Program Numbers,the display shows the Program Number
at the Copy Destination and the name of the Effects Program stored there.
7) Press WRITE again and the program is copied to the specified Program
Number.Once it has been copied the unit returns to the Play Mode.
8) Turn Memory Protect" On " again by following steps 1 through 3 .