DEMORA System Program (Ver.1.05)

This system program updates the DEMORA system program to the latest version 1.05.

What you will need to update your DEMORA
  • DEMORA
  • AC adaptor
  • USB cable (A-microB type)
  • A computer with a USB connector ( Windows / MacOS X )


How to tell the version
Please check the version of the system working on your DEMORA before downloading the archive file.
  1. Hold down [ GRF 6 ] button, and switch on the power.
  2. Connect the computer to the DEMORA's USB port by a USB cable.
  3. Open the "AIRAMODULAR" drive folder in your personal computer.
  4. AIRAMODULAR ドライブにある VERSION.TXT を開いて、バージョンを確認します。
  5. VERSION.TXT を閉じて、パソコンで USB 接続を解除してから USB ケーブルを抜きます。
  6. Turn the DEMORA power off.
* If this shows the latest version, there's no need to update your DEMORA.


Update history
[ Ver.1.05 ]
[ Functionality Improvement ]
  • Internal processing has been improved.
    * There is no change affecting the product specification.

Caution when performing the update
  • Never apply this update data to any product other than the DEMORA. This update data may destroy the data or system program of other products.
  • Never power-off your DEMORA while the update is in progress!
    If a power failure or similar accident occurs during the update process, the DEMORA won’t be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
  • We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.


Getting the update file
Please open/extract the downloaded "demora_sys_v105.zip" file on your computer to get the update file in the "demora_sys_v105" folder.

Procedure for the update
Caution
  • You must not rename the extracted file.
  • Never turn off the DEMORA's power while the update is in progress. Otherwise the system program or the DEMORA itself may be destroyed.

Please install the extracted system program file into your DEMORA according to the following procedure.
  1. Hold down [ GRF 6 ] button, and switch on the power.
  2. Connect the computer to the DEMORA's USB port by a USB cable.
  3. Open the "AIRAMODULAR" drive folder in your personal computer.
  4. Copy ???????????.BIN in the "demora_sys_v105" folder into the "AIRAMODULAR" drive by dragging and dropping it.
    * Do not copy the "demora_sys_v105" folder.
  5. After copying the file is completed, remove the USB drive from the personal computer.
    With Windows 8 / 7 / Vista
    Right-click on the "AIRAMODULAR" icon in My Computer and execute "Eject."
    With Mac OS
    Drag the "AIRAMODULAR" icon to the Trush icon in the Dock.
  6. Disconnect the USB cable.
    センター・インジケーターが水色に点灯して、[ GRF 6 ] ボタンが点滅します。
  7. Press the [ GRF 6 ] button to start updating the file.
    アップデート中は、センター・インジケーターが白色に点灯して、GRF 5 と GRF 6 が交互に点灯します。
  8. アップデートが終了すると、センター・インジケーターが青色に点滅して、GRF 5 とGRF 6 が点滅します。
  9. Turn the DEMORA power off.
    Please verify the version number with the procedure described in "How to tell the version" part of this document.