D-05 System Program (Ver.1.03)


How to know the version
Before you start, check the system program version of your D-05.
 
  1. Hold down [ PATCH BANK 1 ] button switch on the power to the unit.
  2. The version information screen appears.
  3. Turn the D-05 power off.
 
Update history
[ Ver.1.03 ] SEP 2017
Functionality Improvement
  • The Transpose setting is now applied to playback of preview audio using the C1 ribbon controller.
 
What you will need to update your D-05
  • D-05
  • Micro USB cable ( Dedicated charging cables cannot be used. )
  • A computer with a USB connector ( Windows, Mac )
 
Caution when performing the update
  • Never apply this update data to any product other than the D-05. This update data may destroy the data or system program of other products.
  • Never power-off your D-05 while the update is in progress!
    If a power failure or similar accident occurs during the update process, the D-05 won't be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
  • We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

Getting the update file
Please open/extract the downloaded "boutique3_sys_103.zip" file on your computer to get the update file in the "boutique3_sys_103" folder.

Procedure for the update
Caution
  • You must not rename the extracted file.
  • Never turn off the D-05's power while the update is in progress. Otherwise the system program or the D-05 itself may be destroyed.

Please install the extracted system program file into your D-05 according to the following procedure.
  1. Connect the computer to the D-05's USB port by a USB cable.
  2. Hold down [ PATCH NUMBER 8 ] and switch on the power.
  3. Open the "D-05" drive folder in your personal computer.
  4. Copy BQ3_UPD.BIN in the "boutique3_sys_103" folder into the "D-05" drive by dragging and dropping it.
    * Do not copy the "boutique3_sys_103" folder.
  5. After copying the file is completed, remove the USB drive from the personal computer.
    With Windows
    Right-click on the "D-05" icon in My Computer and execute "Eject."
    With Mac
    Drag the "D-05" icon to the Trash icon in the Dock.
  6. Press the [ PATCH NUMBER 8 ] button to start updating the file.
    When the message "Completed" appears, the update operation has finished.
  7. Turn the D-05 power off.
    * During startup for the first time after updating, the display might continue to show nothing for about 20 seconds. Continue waiting until the unit starts normally.