BITRAZER System Program (Ver.1.05)

This system program updates the BITRAZER system program to the latest version 1.05.

What you will need to update your BITRAZER
  • BITRAZER
  • AC adaptor
  • USB cable (A-microB type)
  • A computer with a USB connector ( Windows / MacOS X )


How to tell the version
Please check the version of the system working on your BITRAZER before downloading the archive file.
  1. Hold down [ GRF 6 ] button, and switch on the power.
  2. Connect the computer to the BITRAZER's USB port by a USB cable.
  3. Open the "AIRAMODULAR" drive folder in your personal computer.
  4. AIRAMODULAR ドライブにある VERSION.TXT を開いて、バージョンを確認します。
  5. VERSION.TXT を閉じて、パソコンで USB 接続を解除してから USB ケーブルを抜きます。
  6. Turn the BITRAZER power off.
* If this shows the latest version, there's no need to update your BITRAZER.


Update history
[ Ver.1.05 ]
[ Functionality Improvement ]
  • BIT DOWN の効果範囲を調整しました。

Caution when performing the update
  • Never apply this update data to any product other than the BITRAZER. This update data may destroy the data or system program of other products.
  • Never power-off your BITRAZER while the update is in progress!
    If a power failure or similar accident occurs during the update process, the BITRAZER won’t be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
  • We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.


Getting the update file
Please open/extract the downloaded "bittrzr_sys_v105.zip" file on your computer to get the update file in the "bittrzr_sys_v105" folder.

Procedure for the update
Caution
  • You must not rename the extracted file.
  • Never turn off the BITRAZER's power while the update is in progress. Otherwise the system program or the BITRAZER itself may be destroyed.

Please install the extracted system program file into your BITRAZER according to the following procedure.
  1. Hold down [ GRF 6 ] button, and switch on the power.
  2. Connect the computer to the BITRAZER's USB port by a USB cable.
  3. Open the "AIRAMODULAR" drive folder in your personal computer.
  4. Copy ???????????.BIN in the "bittrzr_sys_v105" folder into the "AIRAMODULAR" drive by dragging and dropping it.
    * Do not copy the "bittrzr_sys_v105" folder.
  5. After copying the file is completed, remove the USB drive from the personal computer.
    With Windows 8 / 7 / Vista
    Right-click on the "AIRAMODULAR" icon in My Computer and execute "Eject."
    With Mac OS
    Drag the "AIRAMODULAR" icon to the Trush icon in the Dock.
  6. Disconnect the USB cable.
    センター・インジケーターが水色に点灯して、[ GRF 6 ] ボタンが点滅します。
  7. Press the [ GRF 6 ] button to start updating the file.
    アップデート中は、センター・インジケーターが白色に点灯して、GRF 5 と GRF 6 が交互に点灯します。
  8. アップデートが終了すると、センター・インジケーターが青色に点滅して、GRF 5 とGRF 6 が点滅します。
  9. Turn the BITRAZER power off.
    Please verify the version number with the procedure described in "How to tell the version" part of this document.