VG-99

V-Guitar System

VG-99
Poistuneet

Kitaramallinnuksen ja esitysteknologian merkkipaalu

Kitaramallinnuksen historiassa ei mikään muu valmistaja ole panostanut yhtä paljon aikaa, resursseja ja intohimoa tähän markkina-alueeseen kuin Roland. Näyttöä löytyy aina maailman ensimmäisestä mallintavasta VG-8 kitaraprosessorista suosittuihin V-Guitar –malleihin. Tänään Roland julkistaa jälleen yhden merkkipaalun kitaramallinnuksen ja prosessoinnin teknologiassa: VG-99:n. Mallin sydämenä on kolme uutta tehokasta prosessoria sekä monipuoliset esitysohjaimet kuten Ribbon-kontrolleri sekä D BEAM.

Video Library

Audio processing
AD Conversion
24 bits + AF method
DA Conversion
24 bits
Sampling Frequency
44.1 kHz
Program Memories
400: 200 (User) + 200 (Preset)
Nominal Input Level
GUITAR INPUT: -10 dBu
Input Impedance
GUITAR INPUT: 2.2 M ohm
Nominal Output Level
MAIN OUT: -10 dBuSUB OUT (XLR): +4 dBuGUITAR OUT: -10 dBu
Output Impedance
MAIN OUT: 1 k ohmSUB OUT (XLR): 600 ohms
Dynamic Range
100 dB or greater (IHF-A)
Digital Output
Coaxial type (conforms to IEC60958)
Top Panel
Controls
OUTPUT LEVEL knob, Function knobs (F1--F6), BALANCE knob, PATCH LEVEL knob, V-LINK button, DIRECT PATCH buttons (1--5), CONTROL buttons (1, 2), COSM GUITAR MODELING TYPE buttons (A, B), COSM GUITAR ALTERNATE TUNING button, POLY FX A/B buttons (A, B), FX buttons (A, B), COSM AMP buttons (A, B), MIXER buttons (A, B), DELAY/REVERB button, DYNAMIC button, CHAIN button, CONTROL ASSIGN button, NAME/KEY/BPM button, Function buttons (F1--F6), EXIT button, WRITE button, PAGE buttons x 2 (Left, Right), GUITAR TO MIDI button, SYSTEM button, GLOBAL button, TUNER button, CATEGORY button, PATCH/VALUE dial, Power switch
D Beam Controller
PITCH button, FILTER button, ASSIGNABLE button
RIBBON CONTROLLER
PITCH button, FILTER button, ASSIGNABLE button
Display
240 x 64 dots graphic LCD (backlit LCD)
Connectors/Switches/others
Top Panel
GK IN connector
Rear Panel
GUITAR INPUT jack, GUITAR OUTPUT jack, SUB OUT jacks (XLR)(L, R)MAIN OUT jacks x 2 (L/MONO, R)PHONES jack, DIGITAL OUT jack, EXP PEDAL jack, CTL 3,4 jack, USB connector, RRC2 connector, MIDI connectors x 2 (IN, OUT), DC IN jack, Ground Lift switch (SUB OUT)
Power Supply
AC Adaptor (PSB-1U)
Current Draw
1.3 A
Accessories
Owner's Manual, GK cable (3 m), USB cable, RRC2 cable, VG-99 Software CD-ROM, AC adaptor (PSB-1U), Roland Service (information sheet)
Options
Divided Pickup: GK-3, MIDI Foot Controller: FC-300, Footswitch: BOSS FS-5U/6, Expression Pedal: EV-5, BOSS FV-500L/500H, GK Cable: GKC-10/5/3, Unit Selector: US-20, GK Parallel Box: GKP-4, Rack Mount Adaptor: RAD-99, Pad Stand: PDS-10, Footswitch Cable: PCS-31L
Size and Weight ( Dimensions )
Width
384 mm

15-1/8 inches
Depth
218 mm

8-5/8 inches
Height
94 mm

3-11/16 inches
Weight
2.1 kg

4 lbs. 11 oz.
* EIA-5U rack mount type: optional rack mount adaptor RAD-99
* 0 dBu = 0.775 V rms
*The specifications are subject to change without notice.

Video Library

Lataukset

Päivitykset & Ajurit

Tuki

Jos sinulla on kysyttävää Roland tuotteesi käytöstö, ole hyvä ja katso meidän Knowledge Base löytääksesi vastaukset yleisimpiin kysymyksiin.
Voit ottaa yhteyttä myös Tuotetuki osastoomme puhelimitse tai sähköpostitse.
Lisäksi, meillä on kirjasto käyttöohjeita and Tukidokumentteja jotka voit ladata.

Tukidokumentteja

  • VG-99 Q&A

    A collection of popular articles from the VG-99 knowledge base.

  • VG-99 Turbostart
  • VG-99 Workshop 01: Introduction to the VG-99

    The VG-99 is hands-down the most powerful guitar processor ever made, capable of transforming your instrument with sounds both familiar and unreal. This booklet introduces you to the VG-99’s creative possibilities and discusses some of the technologies that are part of it.

  • VG-99 Workshop 02: Pickup Settings

    This booklet gives you the lowdown on using a divided pickup with the VG-99, including the Roland GK-3 and third-party piezo-type systems. Using your guitar’s normal pickups is covered as well.

  • VG-99 Workshop 03: On-the-Gig Sound Settings

    The VG-99 makes it easy to tweak its overall sound for different performing environments without changing the sounds stored in the individual patches. This booklet shows you how.

  • VG-99 Workshop 04: Using the Built-in Tuner

    When working with the VG-99, you’ll find the built-in chromatic tuner to be one of its most often-used features. This booklet discusses how to use the tuner and control it with external switches.

  • VG-99 Workshop 05: Working with Patches

    A VG-99 patch stores all the parameter settings that make up a particular sound. In this booklet, we show you how to select, save, and manage your patches in the VG-99.

  • InFocus 02: Roland’s Librarian Software

    If you’re the kind of person who digs into your Roland/BOSS gear, odds are you go way beyond factory patches and settings. It’s for users like you that we include a computer-based Librarian application for backing up and organizing your data. This booklet explains the Roland/BOSS Librarian.