E-X20A System Program (Ver.1.2.0)
HOW TO KNOW THE VERSION
Before you start, check the firmware version of your E-X20A.
- While holding down [ STORE ] + [ M2 ] + [ M4 ], turn power ON.
* Continue holding down buttons until the version information appears on the display.
- The version will be displayed at the Display.
- Turn power OFF.
* If this shows the latest version, there's no need to update your E-X20A.
UPDATE HISTORY
[
Ver.1.2.0 ] FEB 2020
Functionality Improvement
- The style data for Brazil Styles has been adjusted.
WHAT YOU WILL NEED TO UPDATE YOUR E-X20A
- E-X20A
- A computer (Windows PC only) with a USB connector.
- USB cable
CAUTION WHEN PERFORMING THE UPDATE
- Never apply this update data to any product other than the E-X20A. This update data may destroy the data or firmware of other products.
- Never power-off your E-X20A while the update is in progress!
If a power failure or similar accident occurs during the update process, the E-X20A won’t be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
- We regret that we are unable to answer questions regarding the update procedure using this firmware. Please perform the update responsibly, following the directions given in the Update Manual.
GETTING THE UPDATE FILE
Please open/extract the downloaded "ex20a_firm_v120.zip" file on your computer to get the update files in the "ex20a_firm_v120" folder.
PROCEDURE FOR THE UPDATE
Please refer to the "Roland Comm Firmware Update Manual v1.0.pdf" in the folder.