XV-88
- Information
- Manuals
- Downloads
- Confirmation
- FAQ
Listing items from 21 to 40 of 42 results.
- Q.Can you tell me the differences between the Performance, Patch, Rhythm, and GM Modes?
-
A.
The XV series incorporates four modes to achieve the best ･･･
- Q.Sometimes the playback slows down (like a hiccup) and it gets out of tempo or suddenly cuts off. Why does this happen?
-
A.
Sometimes the playback can slow down if the sequencer or the ･･･
- Q.I got noise when I have quick move to the Panpot using LFO with Matrix Control function. Could you tell me why?
-
A.
Slow down the speed of the move (reduce the LFO rate). ･･･
- Q.Can I remotely control cutoff frequency or resonance with MIDI messages ?
-
A.
It is possible to remotely control cutoff frequency and ･･･
- Q.Can I send a MIDI message to an XV series so that a Performance part will switch from Patch to Rhythm or vice-versa?
-
A.
Yes, it's possible. The XV series can switch any Performance ･･･
- Q.During playback, one of my sequenced parts will not sound. I tried to select a Patch and even sent a Program Change, but still no sound comes out. Why?
-
A.
If the XP series receives an invalid Bank Select from a song ･･･
- Q.How can I change Patches, Performances or Rhythm Kits remotely from a MIDI keyboard or sequencer ?
-
A.
The Patches, Performances and Rhythm Kits can be changed by ･･･
- Q.Sometimes the pitch of a Patch will not go up as high as the current settings of the Pitch Bend Range for the Patch. Why does this happen ?
-
A.
The Pitch Bend Range of a Patch can be set from –48 to ･･･
- Q.How many data files (SVD file) can be saved on a Smart Media card ?
-
A.
The maximum number of files is 99, but only when using cards ･･･
- Q.How can I access Patches or Performances that are saved on a Smart Media card ?
-
A.
The Patches and Performances saved on a Smart Media card are ･･･
- Q.Is it possible to edit and write Patches and Performances in the Card Bank ( those saved on the Smart Media card)
-
A.
This is possible only on the XV-5080. ･･･
- Q.What kind of user settings can the XV series store on a Smart Media card?
-
A.
All System settings, User Performance settings, User Patch ･･･
- Q.What kind of Smart Media card is compatible with the XV series ?
-
A.
Either 5V or 3.3･･･
- Q.Can the XV series retain the GM Mode setting as a Performance or a Patch in Memory ?
-
A.
No. The GM Mode settings cannot be retained in the Memory of ･･･
- Q.The settings of the Performances and Patches are changed when I turn on the power, even though I used LAST SET in the Power Up Mode in the System Parameter.
-
A.
When using LAST SET in the Power Up Mode, the XV series ･･･
- Q.Sometimes the sound of a Patch is different from the one I edited. I wonder why this happens ?
-
A.
This condition can occur when you edit Volume, Modulation and ･･･
- Q.Sometimes when I go back to a Performance I get a different sound from when I played it before. I wonder why this happens ?
-
A.
This can happen when an edit is performed on a Part or when ･･･
- Q.Does the XV Series / Fantom have the same Program Change Map as the JV series/XP series ?
-
A.
The XV-3080 / XV-88 / XV-5080 / Fantom / XV-5050 have ･･･
- Q.Can Patch data or Rhythm Set data from the XV-5080 which contains sample data be loaded into other XV series products?
-
A.
No, they can't. Patch data and Rhythm Set data from the ･･･
- Q.Can the XV-3080/XV-88/XV-5080 load Patch data or Performance data from the XP-30 when it is saved on a Smart Media card ?
-
A.
The Patch data and the Rhythm data of the XP-30 can be loaded ･･･
- Product Support
- Link
Visit your local Roland website via the www.roland.com home page.
All content included on this website is the property of Roland Corporation. All company names, product names and logo marks mentioned in this website are registered trademarks or trademarks of Roland Corporation or their respective owners.
Copyright © 1999-2013 Roland Corporation. All Rights Reserved.