XV-5080

128-Voice Expandable Synthesizer/Sample Playback Module

Listing items from 21 to 40 of 47 results.

<< Prev   |123|    Next >>

Q.Both Volume and Pan are reset when I select a new Patch in Patch Mode. Why is this?

A.

Set Patch Remain to ON so that the Control Change information ・・・

Q.Why does the sound get cutoff for a moment when I select a new Patch ? Is there any way to solve this problem?

A.

The XP series exchanges a vast amount of data when changing to ・・・

Q.When the Performance Control Channel of an XV series is set to the same MIDI channel as a Part, what will happen when they receive the same MIDI messages ?

A.

When the XV series receives a Program Change and a ・・・

Q.I set up a Key Range in the Performance Mode. But sometimes the actual key range turns to be narrower than my setting. Why is this ?

A.

The Key Range setting can also be set in each Patch of your ・・・

Q.What will happen if I lose power during tone editing ? Also, what will happen to my edited patch if I select a different one?

A.

It will disappear. If you want to retain the contents of an ・・・

Q.Can I reset my User banks back to factory settings?

A.

Yes, the XV series are equipped with a Factory Reset function. ・・・

Q.Can you tell me the differences between the Performance, Patch, Rhythm, and GM Modes?

A.

The XV series incorporates four modes to achieve the best ・・・

Q.Sometimes the playback slows down (like a hiccup) and it gets out of tempo or suddenly cuts off. Why does this happen?

A.

Sometimes the playback can slow down if the sequencer or the ・・・

Q.I got noise when I have quick move to the Panpot using LFO with Matrix Control function. Could you tell me why?

A.

Slow down the speed of the move (reduce the LFO rate). ・・・

Q.Can I remotely control cutoff frequency or resonance with MIDI messages ?

A.

It is possible to remotely control cutoff frequency and ・・・

Q.Can I send a MIDI message to an XV series so that a Performance part will switch from Patch to Rhythm or vice-versa?

A.

Yes, it's possible. The XV series can switch any Performance ・・・

Q.During playback, one of my sequenced parts will not sound. I tried to select a Patch and even sent a Program Change, but still no sound comes out. Why?

A.

If the XP series receives an invalid Bank Select from a song ・・・

Q.How can I change Patches, Performances or Rhythm Kits remotely from a MIDI keyboard or sequencer ?

A.

The Patches, Performances and Rhythm Kits can be changed by ・・・

Q.Sometimes the pitch of a Patch will not go up as high as the current settings of the Pitch Bend Range for the Patch. Why does this happen ?

A.

The Pitch Bend Range of a Patch can be set from –48 to ・・・

Q.How many data files (SVD file) can be saved on a Smart Media card ?

A.

The maximum number of files is 99, but only when using cards ・・・

Q.How can I access Patches or Performances that are saved on a Smart Media card ?

A.

The Patches and Performances saved on a Smart Media card are ・・・

Q.Is it possible to edit and write Patches and Performances in the Card Bank ( those saved on the Smart Media card)

A.

This is possible only on the XV-5080. ・・・

Q.What kind of user settings can the XV series store on a Smart Media card?

A.

All System settings, User Performance settings, User Patch ・・・

Q.What kind of Smart Media card is compatible with the XV series ?

A.

Either 5V or 3.3・・・

Q.Can the XV series retain the GM Mode setting as a Performance or a Patch in Memory ?

A.

No. The GM Mode settings cannot be retained in the Memory of ・・・

<< Prev   |123|    Next >>

To the top of page