- Information
- Manuals
- Downloads
- Confirmation
- FAQ
Listing items from 21 to 32 of 32 results.
- Q.I got noise when I have quick move to the Panpot using LFO with Matrix Control function. Could you tell me why?
-
A.
Slow down the speed of the move (reduce the LFO rate). ･･･
- Q.Can I remotely control cutoff frequency or resonance with MIDI messages ?
-
A.
It is possible to remotely control cutoff frequency and ･･･
- Q.Can I send a MIDI message to an XV series so that a Performance part will switch from Patch to Rhythm or vice-versa?
-
A.
Yes, it's possible. The XV series can switch any Performance ･･･
- Q.During playback, one of my sequenced parts will not sound. I tried to select a Patch and even sent a Program Change, but still no sound comes out. Why?
-
A.
If the XP series receives an invalid Bank Select from a song ･･･
- Q.How can I change Patches, Performances or Rhythm Kits remotely from a MIDI keyboard or sequencer ?
-
A.
The Patches, Performances and Rhythm Kits can be changed by ･･･
- Q.Sometimes the pitch of a Patch will not go up as high as the current settings of the Pitch Bend Range for the Patch. Why does this happen ?
-
A.
The Pitch Bend Range of a Patch can be set from –48 to ･･･
- Q.Can the XV series retain the GM Mode setting as a Performance or a Patch in Memory ?
-
A.
No. The GM Mode settings cannot be retained in the Memory of ･･･
- Q.Sometimes the sound of a Patch is different from the one I edited. I wonder why this happens ?
-
A.
This condition can occur when you edit Volume, Modulation and ･･･
- Q.Sometimes when I go back to a Performance I get a different sound from when I played it before. I wonder why this happens ?
-
A.
This can happen when an edit is performed on a Part or when ･･･
- Q.I installed the driver in my Macintosh, but an error massage saying "Unable to use the function extension” appeared.
-
A.
When the OS X driver included with your product is installed ･･･
- Q.When I playback a MIDI song using an XP/XV/RS/JUNO/JV/Fantom-series instrument, only one instrument plays. Why does this happen?
-
A.
Most likely, Patch mode has been selected by mistake. ･･･
- Q.I've connected a MIDI device to a Macintosh via USB, and am creating a setup in Free MIDI, but the connected MIDI device is not detected (or my computer freezes).
-
A.
It is possible that Free MIDI and other system extensions are ･･･
- Product Support
- Link
Visit your local Roland website via the www.roland.com home page.
All content included on this website is the property of Roland Corporation. All company names, product names and logo marks mentioned in this website are registered trademarks or trademarks of Roland Corporation or their respective owners.
Copyright © 1999-2013 Roland Corporation. All Rights Reserved.