VT-3

Voice Transformer

Q.What are the required specs of a computer that can be connected?

A.The system requirements of a connectable computer are as follows.

Minimum System Requirments

< Windows >>

- Operating System -
Microsoft(R) Windows(R) 8 / 8.1 ( 64-bit / 32-bit )
Microsoft(R) Windows(R) 7 ( 64-bit / 32-bit ) (Service Pack 1 or later)
Microsoft(R) Windows Vista(R) ( 64-bit / 32-bit ) (Service Pack 2 or later)

* This driver will not work on Windows RT.

- Computer -
Windows-compatible PC equipped with USB 2.0 port

* Intel chipset recommended.
* VT-3 may not perform to its full specs when used with an added USB 2.0 interface card.
* This product cannot be used with a USB 3.0 port that is not compatible with USB 2.0 specification.
* If this product does not work correctly when connected to a USB 3.0 port, you will need to connect it to a USB 2.0 port.
* Even if connected to a USB 3.0 port, the performance of the product will not change.
* This driver cannot be used in a virtual Windows environment, such as Windows XP Mode (Virtual Windows XP) or Virtual PC.
* This driver cannot be used in a virtual Windows environment, such as Hyper-V or Virtual PC.
* Mac computers running Microsoft Windows are not supported.

- CPU/Clock -
Intel(R) Core(TM) 2 Processer / 2.0 GHz or higher

- Memory -
2.0 GB or more

* This software cannot be used in a virtual Windows environment, such as Windows XP Mode (Virtual Windows XP) or Virtual PC.
* Apple Mac computers running Microsoft Windows are not supported.

< Mac OS >>

- Operating System -
Mac OS X v10.6.8 / v10.7 / OS X v10.8 / OS X v10.9

- Computer -
Apple Mac series computer with on-board USB 2.0 port

- CPU / Clock -
Intel(R) Core(TM) 2 Processer / 2.0 GHz or higher

- Memory -
2.0 GB or more
* Even if connected to a USB 3.0 port, the performance of the product will not change.
* Mac computers running Microsoft Windows are not supported.


Attention
* Please also check the System requirements for the audio/MIDI application and the operating system you're using.
* Before connecting to a computer, install the dedicated USB driver for the VT-3.
* The sample rate of the VT-3 is fixed at 96 kHz and cannot be changed. Set the sample rate of the audio or MIDI program you're using to 96 kHz.

(2014/05/15)

To the top of page