V-8

Listing items from 1 to 17 of 17 results.

Q.The field of view of video images output from the OUT PUT terminal differs from those output from PREVIEW OUT or MONITOR OUT terminal.

A.

Images are output from the OUT PUT terminal after internally ･･･

More

Q.What is the difference between V-4 and V-8?

A.

V-8 is different from V-4 as follows:     ･･･

More

Q.Are cables and RCA-BNC conversion plugs supplied?

A.

Cables for connection with external devices are not supplied. ･･･

More

Q.When a video signal is input to both of the PC input terminal and INPUT8 terminal, which one will be output from the OUTPUT terminal?

A.

Because the S-Video terminal input is given higher priority, ･･･

More

Q.Can the video images input to PC1 and PC2 be superimposed?

A.

No. One of the video images input to PC1 and PC2 is selected ･･･

More

Q.Is the vide image output from the MONITOR OUT terminal same as the one input to one of the INPUT terminals 1 to 8?

A.

Yes. The same video image is output from the MONITOR OUT ･･･

More

Q.When a channel with no video image input is selected, how the output image will be?

A.

It will be black at factory setting, but you can select black ･･･

More

Q.Is PAL or SECAM supported?

A.

SECAM is not supported. V-8 supports NTSC used in Japan and ･･･

More

Q.Can the cross fader V-4CF be used with V-8?

A.

Yes. The standard T-bar type video fader installed on V-8 ･･･

More

Q.The menu screen is displayed on a TV set or monitor connected to the PREVIEW OUT terminal. Can I clear this menu screen and display an output video image instead?

A.

Yes. Change the [Preview Display Mode] setting under ･･･

More

Q.Can I use the device as the presenter for PR-80 or PR-50?

A.

By switching the operation mode of V-8 to "PR Control ･･･

More

Q.Does a delay occur between the input and output of a video image?

A.

A delay of 1 or 2 frames occurs. To synchronize the video ･･･

More

Q.Can I use V-8 to convert NTSC signals to PAL signals?

A.

V-8 does not have a video image conversion function and you ･･･

More

Q.Can I output the final video image or MONITOR OUT video image as an RGB signal?

A.

No. V-8 outputs both the final video image and MONITOR OUT ･･･

More

Q.Is the same video image output from the S-Video output terminal and composite output terminal simultaneously?

A.

The same video image is output from the two composite output ･･･

More

Q.Is the GENLOCK terminal provided?

A.

No. Because V-8 is equipped with frame synchronizers for ･･･

More

Q.When the INPUT SELECT button is used to switch the input, is the video image stable?

A.

Images remain stable during normal switching operations.  ･･･

More