V-4

Q.How can I keep video intact when I leave my finger from the TRANSFORMER button?

A.At the factory setting, while the memory dial is set to #1, video is switched immediately after you leave your finger from the TRANSFORMER button.  To prevent this action, change the memory settings from #2 to #8.  Follow the procedure below. (See Page 55 of V-4 User's Manual.)

   1. Set the memory dial to one of #2 to #8.

   2. Press the [Menu] button.  The menu for changing settings appears on the screen for preview output.
   3. Use the cursor buttons to select "Transformer."
   4. Press the Enter button.
   5. Select a pattern.  If you select a pattern other than 01 or 02,  The video switching pattern changes as follows:
    * 02: Outputs video from the channel corresponding the button only while the button is pressed.
    * 03-12: Video from channels A and B toggles each time you press the button.
    * 13-22: Switches to video from the channel corresponding the button.
    * 23-32: Switches to video from the channel opposite to the channel corresponding the button.
   6. After you made selection, press the menu button to return to the previous screen.

(2010/03/26)

Go back to the list