Q.How can I cut and switch videos from the channels A and B?

A.At the factory setting, while the memory dial is set to #1, videos from channels A and B are cut and switched immediately after you leave your finger from the TRANSFORMER button.  To cut and switch videos when other memory settings are selected, set the switching time of the TRANSFORMER button to 0.  Set the TRANSFORMER button in the procedure below. (See Page 55 of V-4 User's Manual.)

   1. Set the memory dial to one of #2 to #8.
   2. Press the [Menu] button.  The menu for changing settings appears on the screen for preview output.
   3. Use the cursor buttons to select "Transformer."
   4. Press the Enter button.
   5. Select a pattern.  Selecting 02, 12, 22, or 32 pattern allows you to cut and switch videos.  The video switching pattern changes as follows:
    * 02: Outputs video from the channel corresponding the button only while the button is pressed.
    * 12: Video from channels A and B toggles each time you press the button.
    * 22: Switches to video from the channel corresponding the button.
    * 32: Switches to video from the channel opposite to the channel corresponding the button.
   6. After you made selection, press the menu button to return to the previous screen.

(2010/03/26)

To the top of page