Q.Can I switch videos from the channels A and B synchronously with music?

A.Yes.  V-4 can automatically switch videos without operating the video and fader or pressing the switch buttons synchronously with music.

Switching videos using BPM Sync:

Use BPM (Beat Per Minute) to switch videos on every beat.

1. Operate the input selector to feed videos to the channels A and B.
Be sure to feed different videos to these channels.
2. Turn the BPM control to adjust BPM.
A lower value switches videos slowly while a higher value switches videos quickly.
3. Press the [BPM Sync] button. Check that videos switch according to the BPM setting.
You can also turn the BPM dial to adjust the switching timing at this time.


Using the TAP function:

Instead of numeric control by BPM, you can set the switch timing manually.
Use the [Tap] button to define the timing.

1. Operate the input selector to feed videos to the channels A and B.
Be sure to feed different videos to these channels.
2. Press the [BPM Sync] button.
Video switching starts at the timing shown on the BPM indicator.
3. Play back music used as the BGM and press the [Tap] button synchronously with its beat.
The BPM display changes according to the pressing timing. This BPM switches videos.

    Reference:
    Setting the transition pattern to Wipe allows you to check the switching motion easily.

    Setting the transition pattern to Wipe allows you to check the switching motion easily.

(2010/03/26)

To the top of page