UA-101

Listing items from 1 to 20 of 31 results.

<< Prev   ｜1｜2｜    Next >>

Q.Is my product compatible with the Microsoft Windows 7?

A.

Please check the link below for the details. ･･･

More

Q.Is my product compatible with the OS X Lion (10.7)?

A.

Compatibility with OS X Lion (10.7) Here you can get ･･･

More

Q.Is there a table that compares UA-101 and UA-1000 features in the main areas?

A.

Here is the UA-101 and UA-1000 feature-comparison table. ･･･

More

Q.What are the specifications of the UA-101 for analog audio recording and playback. Specifically in the case of recording at 192kHz, are there any limitations?

A.

The number of input / output channels is 10 (8 for analog, 2 ･･･

More

Q.Can I mix the input signals arriving at UA-101's analog input jacks and digital input jack with the playback coming out of the computer and record it?

A.

Yes, you can. Record the output of the UA-101's direct monitor ･･･

More

Q.Can I use the UA-101 connected to a PC via USB in 10-IN (input) / 10-OUT (output) operation?

A.

You can use the UA-101 at its full capability of 10-IN (input) ･･･

More

Q.I want to connect my guitar or bass directly to the FA-101 / FA-66 / UA-25 / UA-101. Is there an input jack for guitar?

A.

Yes, if you want to connect a guitar or bass to the FA-101 / ･･･

More

Q.How can I monitor the playback sound coming out of the computer while muting input monitor signals arriving at INPUT 1--10 that are assigned to output the UA-101's headphone jack and monitor output jacks?

A.

In order to eliminate the input monitor signal arriving at ･･･

More

Q.On the UA-101, how can I assign the input signals arriving at the analog input jacks and digital input jacks, and the output coming out of the computer to the 1- 8 output jacks and the digital output?

A.

Use UA-101 Control Panel (fig. 1) "PATCH BAY" (fig. 2) that ･･･

More

Q.How does the UA-700 / UA-1000 / FA-101 / FA-66 / UA-101 / UA-25 / DA-2496 / UR-80 implement SCMS? (Serial Copy Management System)

A.

When you use the UA-700 / UA-1000 / FA-101 / FA-66 / UA-101 / ･･･

More

Q.How do I adjust the UA-101's input level? What is the input gain setting?

A.

The input levels for the UA-101's analog inputs 1--8 can be ･･･

More

Q.Can the UA-101's direct monitor output signal be sent from 1-8 output jacks or the digital output?

A.

Yes, it can. Use the patch bay program in UA-101 Control ･･･

More

Q.What happens if UA-101’s Direct Monitor Soft Control Switch is set to “ON”?

A.

With the UA-101’s Direct Monitor Soft Control switch set to ･･･

More

Q.How can I assign input signals (routing or patching) to the UA-101's output jacks 1 - 8 and digital output jack?

A.

Use the UA-101 Patchbay/Routing application on the computer to ･･･

More

Q.Can I see the IN/OUT block diagram of the UA-101?

A.

The IN/OUT block diagram of the UA-101 is shown here.

More

Q.Can I monitor a monaural source in both the left and right channel while using Direct Monitoring on the FA-101 / FA-66 / UA-101 / UA-25?

A.

Yes, you can. There is a dedicated switch to control this. ･･･

More

Q.Can I use the Windows Volume Control in the Control Panel to adjust the output level of the FA-101 / UA-101? What about the input level?

A.

On the FA-101 / UA-101, you can use the Windows “Volume ･･･

More

Q.Is the mic input level setting (INPUT 1/2) reset when the power of the FA-101 / FA-66 / UA-25 / UA-101 / UA-5 / UA-700 / DA-2496 / U-8 / UR-80 / M-100FX is turned on/off?

A.

On the FA-101 / FA-66 / UA-25 / UA-101 / UA-5 / UA-700 / ･･･

More

Q.Which UA / FA-Series can simultaneously playback from the computer while recording digital input on the optical S/P DIF input jack?

A.

The FA-101 / FA-66 / UA-5 / UA-700 / UA-1000 / UA-101 allow ･･･

More

Q.Could you show me the wiring diagrams of the balance type (XLR/TRS) input jacks?

A.

The XLR and TRS connections of the UA-101 comply with the AES ･･･

More

<< Prev   ｜1｜2｜    Next >>