TD-3

Percussion Sound Module

Q.How do I restore the TD-3's factory settings?

A.Use the following "Factory Reset" procedure to restore all settings within the TD-3 to the factory-set condition:

  1. While holding down [+] and [-], turn on the power. The display will indicate "rSt," and [DRUM KIT] will blink rapidly.

    * If you decide not to execute the Factory Reset, turn off the TD-3's power.
  2. Press [+] or [-] to choose the desired type of Factory Reset.
    rSt:Restore all settings to the factory-set condition.
    Kit:Restore only the drum kit settings
  3. Press and hold [DRUM KIT] to execute the Factory Reset.

(2005/07/22)

To the top of page