TD-20

Q.What models of Roland products are compatible with the PDS-15 pad stand and the APC-33 all-purpose clamp?

A.The PDS-15 and APC-33 come with a stand holder attachment. This attachment allows the PDS-15 and APC-33 to be mounted to the Roland products listed below.

Models	Screws used for mount
HPD-15	Use the screws included with the PDS-15 to mount the stand holder to the HPD-15.
SPD-20	Important caution: You must use the screws provided with SPD-20 / SPD-S to mount the stand holder attachment to the PDS-15 or APC-33. The product will be irreversibly damaged if you use the mounting screws included with the PDS-15 and APC-33.Use the screws included with the PDS-15 to mount the stand holder to the HPD-15.
SPD-S
SPD-6
SPD-11
SPD-8
TD-6V
TD-12
TD-20
TD-6
TD-3

Note:
SPD-S units with serial numbers earlier than "ZR22700" do not come with attachment screws. Please contact a Roland Service Center to obtain the appropriate screws.

Note:
The PDS-15's angle is adjustable over a range of 0° to 30°. If you need to mount a device at an angle greater than 30°, use the optional APC-33 all-purpose clamp instead and attach it to a cymbal stand or tom stand.

(2006/01/19)

Go back to the list