- Information
- Manuals
- Downloads
- Confirmation
- FAQ
Listing items from 1 to 20 of 23 results.
- Q.Can the TDW-1 be installed in the TD-20 sound module?
-
A.
No. The TDW-1 is NOT compatible with the TD-20.
- Q.Can you show me the pads that are compatible with the TD-series and other sound modules? (2005 Version which includes the TD-12 and VH-11)
-
A.
You can see compatibility details in the Compatibility table ･･･
- Q.Is there a table that compares TD-12 and TD-20 features?
-
A.
Here is the TD-12 and TD-20 feature-comparison table. ･･･
- Q.What are the main feature differences between the TD-20 and the TD-12?
-
A.
The following table compares TD-20 and TD-12 features. ･･･
- Q.Does System expansion board for the TD-20 exist now?
-
A.
Yes, the TDW-20 expansion board is now available. ･･･
- Q.When I strike the center of the head, I sometimes hear the rim-shot sound also.
-
A.
This phenomenon may occur when the cable plugs are not fully ･･･
- Q.What are the suggested drum playing techniques and available functions for each TD-series sound module?
-
A.
The following table shows the suggested drum playing ･･･
- Q.I have a TD-10 set and I’m thinking of replacing the TD-10 sound module with the TD-20. Can the TD-10 set’s pads and cymbals be used with the TD-20?
-
A.
All of the pads and cymbals in the TD-10 set have the required ･･･
- Q.The VH-12 V-Hi-Hat connected to my TD-20 does not trigger properly. What do I need to adjust to fix this?
-
A.
A simple offset adjustment is required to allow the VH-12 to ･･･
- Q.Can I use the FD-7 or FD-8 Hi-Hat Controller pedals with the TD-20?
-
A.
Yes, you can. Use the following procedure to set up the ･･･
- Q.When I perform a cymbal choke operation on a pad, can I simultaneously send a MIDI message from a TD-series module’s MIDI OUT jack to an external MIDI device?
-
A.
Yes. Choke operations are transmitted from the TD-series ･･･
- Q.Is the TD-12 sound module similar in design to the TD-20?
-
A.
Yes. The TD-20, however, is the top-of-the-line TD-series ･･･
- Q.Can I connect two CY-15R (or CY-12R/C) units to the TD-20 and get three-way triggering on both cymbals?
-
A.
The TD-20 provides built-in support for only one three-way ･･･
- Q.When I strike a pad, a pattern starts playing. How can I stop this from happening?
-
A.
The Pad Pattern function allows you to start playback of a ･･･
- Q.I can't play open/closed hi-hat techniques with my TD-series sound module. Why is this?
-
A.
This situation can occur if the hi-hat control pedal (FD-7, ･･･
- Q.What models of Roland products are compatible with the PDS-15 pad stand and the APC-33 all-purpose clamp?
-
A.
The PDS-15 and APC-33 come with a stand holder attachment. ･･･
- Q.I have a V-Drums kit and a TD-20 sound module. Why can't I get different tonal variations when I strike different areas of the pads?
-
A.
The "Positional Sensing" function allows you to achieve ･･･
- Q.Can you show me the pads that are compatible with the TD-series and other sound modules? (2004 Version which excludes the TD-12 and VH-11)
-
A.
You can see compatibility details in the Compatibility table ･･･
- Q.How many drum kits does the TD-20 have? Can I create my own drum kits?
-
A.
The TD-20 has 50 preset drum kits. ･･･
- Q.Is there a feature comparison chart regarding the TD-20X, TDW-20, TD-20 and TD-12?
-
A.
Here is the feature-comparison table. ･･･
- Product Support
- Link
Visit your local Roland website via the www.roland.com home page.
All content included on this website is the property of Roland Corporation. All company names, product names and logo marks mentioned in this website are registered trademarks or trademarks of Roland Corporation or their respective owners.
Copyright © 1999-2013 Roland Corporation. All Rights Reserved.