- Information
- Manuals
- Downloads
- Confirmation
- FAQ
Listing items from 1 to 20 of 28 results.
- Q.I have a TD-10 set and I’m thinking of replacing the TD-10 sound module with the TD-20. Can the TD-10 set’s pads and cymbals be used with the TD-20?
-
A.
All of the pads and cymbals in the TD-10 set have the required ･･･
- Q.When I strike the center of the head, I sometimes hear the rim-shot sound also.
-
A.
This phenomenon may occur when the cable plugs are not fully ･･･
- Q.What are the suggested drum playing techniques and available functions for each TD-series sound module?
-
A.
The following table shows the suggested drum playing ･･･
- Q.When I perform a cymbal choke operation on a pad, can I simultaneously send a MIDI message from a TD-series module’s MIDI OUT jack to an external MIDI device?
-
A.
Yes. Choke operations are transmitted from the TD-series ･･･
- Q.Can I use the data of the drum Kits created with the original TD-10 with the ones upgraded with the TDW-1 ?
-
A.
Yes, you can use them. Be sure to save the data of the drum ･･･
- Q.As for the TDW-1 with V-cymbal Control, what has been improved from the first TDW-1 ?
-
A.
The TDW-1 with V-cymbal control has the following new ･･･
- Q.Sometimes I hear instrument sounds leaking into the Mix Out jacks when I have assigned them to individual outs. Can I cancel the sound leakage ?
-
A.
You can stop it if the source of the leaking sound is because ･･･
- Q.Can I re-arrange the order of the drum kits ?
-
A.
Yes, you can step through the drum kits of your choice in the ･･･
- Q.Can I copy certain Control room settings to other drum kits of the TD-10 ?
-
A.
Yes, you can. Select the Control room setting you want, then ･･･
- Q.With the TD-10, I have changed the trigger settings but I would like to retrieve the initial trigger settings for one bank while maintaining the other banks. Is this possible to do ?
-
A.
Yes it is. Copy the preset trigger bank to the desired trigger ･･･
- Q.What kind of data can the TD-10 save onto the memory card ?
-
A.
The memory card of the TD-10 retains the whole settings of the ･･･
- Q.Can I layer two sounds?
-
A.
Basically layering two sounds is not possible, unless you play ･･･
- Q.Occasionally, I hear a cymbal sound that seems to be generated for no reason. Why does this occur ?
-
A.
This problem is very rare. Make sure that the AC source is ･･･
- Q.If the TD series modules are synchronized through MIDI, can the metronome click be assigned to come out the phones output only ?
-
A.
It is possible with the TD-10 and TD-8. ･･･
- Q.Can I play the V-drums with my acoustic drum set using acoustic drum triggers ?
-
A.
Yes, it is possible. In the TMC-6, TD-10, and TD-8, change the ･･･
- Q.Can I switch drum kits in real time with the V-drums by hitting pads ?
-
A.
Yes, you can switch drum kits through the pads. ･･･
- Q.What is the maximum storage capacity of the sequencer of the TD-10/8/6 ?
-
A.
Approx. 4,000 notes for the TD-10, approx. 14,000 notes for ･･･
- Q.The sound does not change regardless of where the pad is struck. (No response to positional sensing).
-
A.
Position sensing is only available from the SNARE input on the ･･･
- Q.I changed a setting of the drum kit from the factory setting. Can the original settings be brought back ?
-
A.
Yes, it is possible. Use the Drum kit copy feature to ･･･
- Q.Retriggering occurs when I hit V drums. How come it happens ? What causes retriggering ?
-
A.
First check the head of the PD-120 / PD-100 / PD-80 to see if ･･･
- Product Support
- Link
Visit your local Roland website via the www.roland.com home page.
All content included on this website is the property of Roland Corporation. All company names, product names and logo marks mentioned in this website are registered trademarks or trademarks of Roland Corporation or their respective owners.
Copyright © 1999-2013 Roland Corporation. All Rights Reserved.