SP-606

Listing items from 1 to 20 of 21 results.

<< Prev   ｜1｜2｜    Next >>

Q.Can you explain the modes of the SP-606's sequencer?

A.

The SP-606's sequencer has two different modes: "Pattern" and ･･･

More

Q.What is the available sampling time of the SP-606?

A.

The SP-606’s available sampling times (internal memory and ･･･

More

Q.Can I copy samples between the SP-606’s different pad banks?

A.

Yes. The Clipboard function (a memory area that temporarily ･･･

More

Q.I'd like to use the SP-606 as a USB MIDI interface so that I can record note data from my MIDI keyboard into MIDI sequencing software on my computer. What settings do I need to make on the SP-606?

A.

After connecting the SP-606 to a computer via USB, make the ･･･

More

Q.What kinds of effects can I choose for the SP-606’s MFX1 and MFX2? What effect parameters can I control using the CTRL knobs?

A.

The following table shows the 45 different effects available ･･･

More

Q.What is the SP-606's memory configuration?

A.

The SP-606 has two memory areas: internal memory and memory ･･･

More

Q.What is the P606 software that comes with the SP-606?

A.

The P-606 software consists of three sound modules, a pattern ･･･

More

Q.Can I send the SP-606’s internal audio signal to a computer via USB?

A.

Yes, you can. With the factory setting, only the INPUT ･･･

More

Q.What functions can I control when using the SP-606 as a control surface for the P606 software?

A.

From the SP-606, you can control the P606 software in the ･･･

More

Q.I'd like to restore the SP-606's factory settings of samples and patterns. How can I do this?

A.

Use the included CD (DRIVER/FACTORY DATA CD-ROM) to restore ･･･

More

Q.On the SP-606, can I apply the MFX or a mastering effect to a sound and capture the result as a sample?

A.

Yes, you can. If you apply MFX1, MFX2, or mastering effect to ･･･

More

Q.What are the system requirements for the P606 software?

A.

P606 software system requirements: Operating systems ･･･

More

Q.Can I play WAV or AIFF files stored on a CompactFlash card on the SP-606?

A.

The SP-606 cannot play WAV and AIFF files directly. ･･･

More

Q.How can I use SP-606’s built-in USB connector?

A.

The SP-606 features a built-in USB connector that allows you ･･･

More

Q.What can I do using the SP-606’s D Beam?

A.

Three dedicated buttons allow you to choose the following ･･･

More

Q.Where can I find the P606 Owner's Manual?

A.

The P606 Owner's Manual is provided as a PDF file on the ･･･

More

Q.When I connect my computer via USB to a product such as the Fantom-X6, can I format its user or card memory, optimize the memory, or perform operations such as "scan disk" from the computer?

A.

No, you cannot perform such operations from your computer via ･･･

More

Q.On the SP-606, can I play samples with pitched tone intervals?

A.

No, this is not possible.

Q.Is there data compatibility between the SP-303, SP-404, and SP-606?

A.

The specifications of the SP-303, SP-404, and SP-606 differ in ･･･

More

Q.Can I load an SP-606 sample into my computer?

A.

You can load SP-606 sample data into your computer by ･･･

More

<< Prev   ｜1｜2｜    Next >>