R-44

4-channel Portable Recorder

To the product information page

Q.Can I simultaneously record analog and digital inputs with R-44?

A.Yes. By selecting [Dig+Ana] for [Input Select] under [Recording Setup] of system configuration, signals from a digital device connected to the digital input connector and analog audio signals from a microphone or audio device connected to the XLR/TRS input connector are recorded simultaneously.
In this case, the digital input audio is recorded on the channels 1 and 2. Use the channels 3 and 4 to record the analog audio.

* Note
[Dig+Ana] cannot be selected when the recording sampling frequency is 192kHz.

(2010/03/29)

Go back to the list

To the top of page