- Information
- Manuals
- Downloads
- Confirmation
- FAQ
Listing items from 1 to 20 of 35 results.
- Q.How do I set my Roland editor software to communicate with my keyboard/sound module so that I can edit sounds from the PC?
-
A.
Many Roland keyboards and sound modules come with ･･･
- Q.What is the V-Link function ?
-
A.
V-LINK is Roland's original function that links music and ･･･
- Q.Can I change the MIDI channel assignment for each part ?
-
A.
The MC-909 has a fixed MIDI channel assignment for each part, ･･･
- Q.When turning the power on, the MC-909 loads the samples in the user area and memory card, but I want to cancel it in order to get more memory capacity and reduce the set up time. Is it possible to do that ?
-
A.
Set the "Sample Default Load" parameter to "OFF" in the MC-909. ･･･
- Q.After copying preset pattern data to a user locationby using the Pattern Copy function, only the note information was copied. How can I get the note information and the sound information to copy together ?
-
A.
The Patch and volume information is recorded as set up data in ･･･
- Q.What would cause only one pattern to play back repeatedly during song play ?
-
A.
A: If the "Song Step SW" parameter is set to "MANUAL", then a ･･･
- Q.Is it possible to sample several input signals after being mixed together?
-
A.
It is not possible. The MC-909 has two digital inputs ･･･
- Q.How can I transmit the playback of a certain part of the MC-909 to other MIDI devices?
-
A.
Set the Sequencer Output Assign parameter to "EXT" for the ･･･
- Q.What is the maximum length for a pattern ? What is the maximum data size for recording on the MC-909 ?
-
A.
The MC-909 can record up to 998 measures / approx. ･･･
- Q.What genres of music does the MC-909 have in the pattern mode?
-
A.
The MC-909 comes with 215 patterns as shown below. ･･･
- Q.What kind of data can the MC-909 save to a Smart Media card?
-
A.
The data which can be saved to a Smart Media card is shown ･･･
- Q.Is it possible for the MC-909 to perform SAMPLE DUMP STANDARD, that is to transfer sample data using MIDI exclusive messages ?
-
A.
The MC-909 does not have the SAMPLE DUMP STANDARD function.
- Q.What kind of sample rates and bit rates of WAV / AIFF files can the MC-909 load ?
-
A.
Any sample rate less than 96kHz, and all 8-bit, 16-bit, 32-bit ･･･
- Q.Does the edit point automatically fit to the zero-cross point during sample editing on the MC-909?
-
A.
Not automatically. Even when you use the Chop function in auto ･･･
- Q.What type of files can the MC-909 load from another device via USB or from Smart Media ?
-
A.
The MC-909 can load the following file formats: SMF ･･･
- Q.What can the MC-909 do when being connected with the PC via USB ?
-
A.
The USB connect on the MC-909 is used for file transfer ･･･
- Q.Can I connect another device other than a computer to the USB port on the MC-909 ?
-
A.
The USB port on the MC-909 must be directly connect to a ･･･
- Q.Can I record the control information generated when moving a knob or slider?
-
A.
: The MC-909 can record the control information generated when ･･･
- Q.What kind of signals are assignable for the Direct Out 1/2 jacks ?
-
A.
From the Patch Play display you can set the Output for each of ･･･
- Q.What kind of / how many effects does the MC-909 have ?
-
A.
The MC-909 has 2 MFXs (multi-effect, 38 selectable for MFX1 ･･･
- Product Support
- Link
Visit your local Roland website via the www.roland.com home page.
All content included on this website is the property of Roland Corporation. All company names, product names and logo marks mentioned in this website are registered trademarks or trademarks of Roland Corporation or their respective owners.
Copyright © 1999-2013 Roland Corporation. All Rights Reserved.